Welcome

Discussions about the use and operation of SAC (Software Audio Console)

Re: Welcome

Postby jlepore » Sun Jul 01, 2012 8:37 pm

Shane wrote:One caution--don't piss off the guy who writes the software we all love (bugs/"features" and all!)


Could explain why? Are we supposed to just live with show stoppers?

Are we all just super priveleged to have our shows wrecked (along with our reputations) by the great Lentini?
Gigabyte H55-USB3 i5-650/4G/XP/SSD Profire 2626x3/ADAx2/MLA7x1 Motormix x2 AMP/SAC/SAWLite
User avatar
jlepore
 
Posts: 648
Joined: Tue Jun 12, 2012 10:35 am
Location: Minneapolis, MN

Re: Welcome

Postby Craig » Sun Jul 01, 2012 9:08 pm

jlepore wrote:Could explain why? Are we supposed to just live with show stoppers?

Are we all just super priveleged to have our shows wrecked (along with our reputations) by the great Lentini?


+1. Whatever happened to don't piss off your customers?
-Craig
SAC/SAWStudio User
Core 2 Duo running XP with RME Digiface and ADA8000's
TCU
User avatar
Craig
 
Posts: 204
Joined: Tue Jun 12, 2012 12:34 pm
Location: Greensboro NC

Re: Welcome

Postby Yuval » Fri Jul 06, 2012 3:06 am

IMHO we're not dealing here with a big firm trying to squeeze money out of customers. Rather, we're dealing with a single individual who likes what he's doing and does it with the best intentions. If things have gone off-course that's too bad but he's the one who has the ability to try and fix them. I don't think anybody else can.
Yuval
 
Posts: 3
Joined: Fri Jul 06, 2012 3:00 am

Re: Welcome

Postby Russell Landwehr » Fri Jul 06, 2012 3:00 pm

OK, I'm here now too. Whew! I was going through serious SAC Community Withdrawal.

rl
Russell Landwehr
 
Posts: 1
Joined: Fri Jul 06, 2012 2:59 pm

Re: Welcome

Postby Butch » Fri Jul 13, 2012 1:11 am

Hi all
Just found the forum from a post on Pro sound
I know some have had problems but I am at 600+ events with SAC and NO show stopper yet

Hope DF finds this so we can get the Joe and Donnie comedy hour back on
OK maybe NOT!!

Butch
Butch
 
Posts: 107
Joined: Wed Jul 11, 2012 11:41 pm

Re: Welcome

Postby AntonZ » Tue Jul 17, 2012 2:14 am

Butch wrote:Hope DF finds this so we can get the Joe and Donnie comedy hour back on


:lol:
AntonZ
 
Posts: 21
Joined: Wed Jun 20, 2012 5:22 pm
Location: NL

Re: Welcome

Postby marvin » Thu Jul 19, 2012 3:23 am

Found this by searching for "sawstudiouser" "down". Although I seldom post, I did read the old forum a lot, and appreciate that this new forum has been created.

Been using SAW for almost ten years daily, commercially, and it's been rock solid. Understandable if Bob no longer has the same motivation as before. Bug fixes would often be released the same afternoon. I would say that the discussion climate (from both sides) has grown harsher these last years. SAW does things a little different than most programs; that has it's ups and downs. For me, mostly ups. So thanks Bob!

marvin
marvin
 
Posts: 1
Joined: Thu Jul 19, 2012 3:13 am

Re: Welcome

Postby tatkin » Thu Jul 19, 2012 4:06 pm

Greetings... I was going into withdrawal from not reading SAC posts on the forum.

Thanks for stepping up and keeping us in touch...
:D
tatkin
 
Posts: 19
Joined: Thu Jul 19, 2012 4:05 pm
Location: El Paso, TX

Re: Welcome

Postby Eric Cagle » Sat Jul 21, 2012 11:48 pm

Hello all. It is good to see many familiar names again.
Eric Cagle
 
Posts: 1
Joined: Sat Jul 21, 2012 11:43 pm

Re: Welcome

Postby Paul Henry » Sat Aug 25, 2012 9:10 am

Hi guys.

Typical that I would only find out about this forum AFTER Bob's is back up. Lol. :D
Paul Henry
 
Posts: 80
Joined: Fri Aug 24, 2012 7:30 am

PreviousNext

Return to SAC Discussion

Who is online

Users browsing this forum: No registered users and 5 guests