Rack or Core? Rack has 16 xlr's on it and the 6 aux ins and outs on 1/4". Core just has the few 1/4" (2 or 3 I think).
They are only assignable to aux in's I believe.
That would give a combined output count of 22 (16 XLRs plus 6 1/4" jacks) which would hopefully provide me with 11 stereo mix buses.
jlepore wrote:Rack or Core? Rack has 16 xlr's on it and the 6 aux ins and outs on 1/4". Core just has the few 1/4" (2 or 3 I think).
They are only assignable to aux in's I believe.
WurstWerner wrote:Problem is, that you are limited to 16 mixbusses. Sure you can use f.e. matrix outs for feeding the Aux outputs though. Do know if thats fine for your setup.
BTW: I made the suggestion to the Behringer R&D to give us additional output boxes feeded from the P16 system. That would you us 16 freely selectable outputs on top.
Strange thing is, that they don't listen to me all the time
mycorn wrote:no word yet on m-rack stuff
the mix engine is the same firmware as the X so a core is pretty pointless...
the M stuff is about better<?> faders and pre's
and a box that has some kind of faux cool factor
RBIngraham wrote:Is there really any information somewhere that shows that the M32 is not just a X32 with a different name plate? Most of the marketing materials on the web site look to be pretty much the same to me.
Who knows, but to me the M32 looks like its just an X32 for those that are not allowed to use or purchase B gear. There is some minor differences in the level of hoopla over the preamp, but that is all I see as being different. So if the only differences are the preamps, then a core version would make no sense at all. A rack version only has 16 preamps I believe, so hard to say if it would make sence to have a rack or compact version of the M32.
Return to Other DAW Discussion
Users browsing this forum: No registered users and 2 guests